Brass Sheets
Brass Sheets
MAREX can supply rolled brass in sheet and flat format for general applications in annealed, semi-hard and hard state. Possibility of supply with laminated and polished finish.
Alloys
| Material Designation | Composition in % (mass fraction) | Density g/cm3 | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbolic | Numerical | Element | Cu | Al | As | Be | C | Co | Fe | Mn | Ni | P | Pb | S | Si | Sn | Zn | Total other | approx. |
| CuZn5 | CW500L | min. | 94,0 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,9 |
| max. | 96,0 | 0,02 | – | – | – | – | 0,05 | – | 0,3 | – | 0,05 | – | – | 0,1 | – | 0,1 | |||
| CuZn10 | CW501L | min. | 89,0 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,8 |
| max. | 91,0 | 0,02 | – | – | – | – | 0,05 | – | 0,3 | – | 0,05 | – | – | 0,1 | – | 0,1 | |||
| CuZn15 | CW502L | min. | 84,0 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,8 |
| max. | 86,0 | 0,02 | – | – | – | – | 0,05 | – | 0,3 | – | 0,05 | – | – | 0,1 | – | 0,1 | |||
| CuZn20 | CW503L | min. | 79,0 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,7 |
| max. | 81,0 | 0,02 | – | – | – | – | 0,05 | – | 0,3 | – | 0,05 | – | – | 0,1 | – | 0,1 | |||
| CuZn30 | CW505L | min. | 69,0 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,5 |
| max. | 71,0 | 0,02 | – | – | – | – | 0,05 | – | 0,3 | – | 0,05 | – | – | 0,1 | – | 0,1 | |||
| CuZn33 | CW506L | min. | 66,0 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,5 |
| max. | 68,0 | 0,02 | – | – | – | – | 0,05 | – | 0,3 | – | 0,05 | – | – | 0,1 | – | 0,1 | |||
| CuZn36 | CW507L | min. | 63,5 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,4 |
| max. | 65,5 | 0,02 | – | – | – | – | 0,05 | – | 0,3 | – | 0,05 | – | – | 0,1 | – | 0,1 | |||
| CuZn37 | CW508L | min. | 62,0 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,4 |
| max. | 64,0 | 0,05 | – | – | – | – | 0,1 | – | 0,3 | – | 0,1 | – | – | 0,1 | – | 0,1 | |||
| CuZn40 | CW509L | min. | 59,5 | – | – | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,4 |
| max. | 61,5 | 0,05 | – | – | – | – | 0,2 | – | 0,3 | – | 0,3 | – | – | 0,1 | – | 0,2 | |||
| CuZn35Pb1 | CW600N | min. | 62,5 | – | – | – | – | – | – | – | – | – | 0,8 | – | – | – | Rest | – | 8,5 |
| max. | 64,0 | 0,05 | – | – | – | – | 0,1 | – | 0,3 | – | 1,6 | – | – | 0,1 | – | 0,1 | |||
| CuZn37Pb0,5 | CW604N | min. | 62,0 | – | – | – | – | – | – | – | – | – | 0,1 | – | – | – | Rest | – | 8,4 |
| max. | 64,0 | 0,05 | – | – | – | – | 0,1 | – | 0,3 | – | 0,8 | – | – | 0,2 | – | 0,2 | |||
| CuZn37Pb2 | CW606N | min. | 61,0 | – | – | – | – | – | – | – | – | – | 1,6 | – | – | – | Rest | – | 8,4 |
| max. | 62,0 | 0,05 | – | – | – | – | 0,2 | – | 0,3 | – | 2,5 | – | – | 0,2 | – | 0,2 | |||
| CuZn38Pb2 | CW608N | min. | 60,0 | – | – | – | – | – | – | – | – | – | 1,6 | – | – | – | Rest | – | 8,4 |
| max. | 61,0 | 0,05 | – | – | – | – | 0,2 | – | 0,3 | – | 2,5 | – | – | 0,2 | – | 0,2 | |||
| CuZn39Pb0,5 | CW610N | min. | 69,0 | – | – | – | – | – | – | – | – | – | 0,2 | – | – | – | Rest | – | 8,4 |
| max. | 60,5 | 0,05 | – | – | – | – | 0,2 | – | 0,3 | – | 0,8 | – | – | 0,2 | – | 0,2 | |||
| CuZn39Pb2 | CW612N | min. | 59,0 | – | – | – | – | – | – | – | – | – | 1,6 | – | – | – | Rest | – | 8,4 |
| max. | 60,0 | 0,05 | – | – | – | – | 0,3 | – | 0,3 | – | 2,5 | – | – | 0,3 | – | 0,2 | |||
| CuZn20Al2As | CW702R | min. | 76,0 | 1,8 | 0,02 | – | – | – | – | – | – | – | – | – | – | – | Rest | – | 8,4 |
| max. | 79,0 | 2,3 | 0,06 | – | – | – | 0,07 | 0,1 | 0,1 | 0,01 | 0,05 | – | – | – | – | 0,3 | |||
Possibility of supplying in: polished surface finish, and/or plasticized finish
Equivalences
LEAD-FREE BRASS
| EN | DIN | ASTM | BS | JIS | SN | ||
|---|---|---|---|---|---|---|---|
| SYMBOLIC | NUMERICAL | SYMBOLIC | NUMERICAL | ||||
| CuZn5 | CW500L | CuZn5 | 2.0220 | C21000 | – | C2100 | CuZn5 |
| CuZn10 | CW501L | CuZn10 | 2.0230 | C22000 | CZ101 | C2200 | CuZn10 |
| CuZn15 | CW502L | CuZn15 | 2.0240 | C23000 | CZ102 | C2300 | CuZn15 |
| CuZn20 | CW503L | CuZn20 | 2.0250 | C24000 | CZ103 | C2400 | CuZn20 |
| CuZn28 | CW504L | CuZn28 | 2.0261 | – | – | . | CuZn28 |
| CuZn30 | CW505L | CuZn30 | 2.0265 | C26000 | CZ106 | C2600 | CuZn30 |
| CuZn33 | CW506L | CuZn33 | 2.0280 | C26800 | CZ107 | C2680 | – |
| CuZn36 | CW507L | CuZn36 | 2.0335 | C27000 | CZ108 | C2700 | CuZn36 |
| CuZn37 | CW508L | CuZn37 | 2.0321 | C27200 | CZ108 | C2700 | CuZn37 |
| CuZn40 | CW509L | CuZn40 | 2.0360 | C28000 | CZ109 | C2800 | CuZn40 |
LEADED BRASS
| EN | DIN | ASTM | BS | JIS | SN | ||
|---|---|---|---|---|---|---|---|
| SYMBOLIC | NUMERICAL | SYMBOLIC | NUMERICAL | ||||
| CuZn37Pb0,5 | CW604N | CuZn37Pb0,5 | 2.0332 | C33500 | – | – | CuZn37Pb0,5 |
| CuZn35Pb1 | CW600N | CuZn36Pb1,5 | 2.0331 | C34000 | CZ118 | C3501 | CuZn36Pb1 |
| CuZn35Pb2 | CW601N | CuZn36Pb1,5 | 2.0331 | C34200 | CZ119 | – | CuZn35Pb2 |
| C34500 | CZ131 | ||||||
| CuZn37Pb1 | CW605N | – | – | C35000 | CZ131 | C3501 | – |
| CuZn37Pb2 | CW606N | – | – | C35300 | CZ131 | C3601 | CuZn37Pb2 |
| CuZn36Pb2As | CW602N | – | – | C35330 | CZ132 | – | – |
| CuZN36Pb3 | CW603N | 2.0375 | CuZn36Pb3 | C36000 | CZ124 | C3601 | CuZn36Pb3 |
| C3602 | |||||||
| CuZn38Pb4 | CW609N | – | – | – | CZ121/4 | C3605 | – |
| CuZn39Pb0,5 | CW610N | CuZn39Pb0,5 | 2.0372 | C36500 | CZ123 | – | CuZn39Pb0,5 |
| CuZn38Pb1 | CW607N | – | – | C37000 | CZ129 | C3501 | CuZn38Pb1 |
| CuZn38Pb2 | CW608N | – | – | C37700 | CZ128 | – | CuZn38Pb2 |
| CuZn39Pb2 | CW612N | CuZn39Pb2 | 2.0380 | C37700 | CZ128 | C3771 | CuZn39Pb2 |
| CuZn40Pb2 | CW617N | CuZn40Pb2 | 2.0402 | C37800 | CZ120 | C3603 | CuZn40Pb2 |
| C38000 | C3604 | ||||||
| CuZn43Pb2Al | CW624N | CuZn44Pb2 | 2.0410 | C38000 | – | – | – |
| CuZn39Pb3 | CW614N | CuZn39Pb3 | 2.0401 | C38500 | CZ121/3 | C3603 | CuZn39Pb3 |
| C3604 | |||||||
| CuZn40Pb1Al | CW616N | – | – | – | – | – | CuZn40Pb1 |
| CuZn42PbAl | CW621N | – | – | – | – | – | – |
| CuZn39Pb1 | CW719R | CuZn38Sn1 | 3.0530 | C46400 | CZ133 | – | CuZn38Sn1 |
| CuZn31Si | CW708R | CuZn31Si | 2.0490 | – | – | – | – |
| CuZn37Mn3Al2PbSi | CW713R | CuZn40Al2 | 2.0550 | C67410 | CZ 135 | – | CuZn40Al2 |
| CuZn35Ni3Mn2AlPb | CW710R | CuZn35Ni | 2.0540 | – | – | – | – |
| CuZn40Mn1Pb1 | CW720R | CuZn40Mn1Pb | 2.0580 | – | CZ136 | – | CuZn40Mn1Pb1 |
| CuZn40Mn2Fe1 | CW723R | CuZn42Mn2 | 2.0572 | – | – | – | CuZn42Mn2 |
| CuZn20Al2As | CW702R | CuZn20Al2 | 2.0460 | C68700 | CZ110 | C6870 | – |
Technical characteristics
| Designations | Nominal thickness
mm |
Tensile Strength Rm N/mm2 |
Proof stress of0,2% Rp0.2 N/mm2 |
Elongation | Hardness HV |
Grain size mm |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A50mm For thicknesses to 2.5mm included % min. |
A For thicknesses Over 2.5mm % min. |
||||||||||||
| Material | Metallurgical State | ||||||||||||
| Symbolic | Numerical | from | up to and including | min. | max. | min. | max. | min. | max. | ||||
| CuZn5 | CW500L | R230 | 0,2 | 5 | 230 | 280 | (max. 130) | 36 | 45 | – | – | – | – |
| H045 | – | – | – | – | – | 45 | 75 | – | – | ||||
| R270 | 0,2 | 5 | 270 | 350 | (min. 200) | 12 | 19 | – | – | – | – | ||
| H075 | – | – | – | – | – | 75 | 110 | – | – | ||||
| R340 | 0,2 | 5 | 340 | – | (min. 280) | 4 | 8 | – | – | – | – | ||
| H110 | – | – | – | – | – | 110 | – | – | – | ||||
| CuZn10 | CW501L | R240 | 0,2 | 5 | 240 | 290 | (max.140) | 36 | 45 | – | – | – | – |
| H050 | – | – | – | – | – | 50 | 80 | – | – | ||||
| R280 | 0,2 | 5 | 280 | 360 | (min. 200) | 13 | 20 | – | – | – | – | ||
| H080 | – | – | – | – | – | 80 | 110 | – | – | ||||
| R350 | 0,2 | 5 | 350 | – | (min. 290) | 4 | 8 | – | – | – | – | ||
| H110 | – | – | – | – | – | 110 | – | – | – | ||||
| CuZn15 | CW502L | R260 | 0,2 | 5 | 260 | 310 | (max. 170) | 36 | 45 | – | – | – | – |
| H055 | – | – | – | – | – | 55 | 85 | – | – | ||||
| G010 | 0,2 | 1 | (340) | (190) | (50) | – | – | 105 | – | 0,015 | |||
| G020 | 0,2 | 2 | (300) | (125) | (50) | – | – | 85 | 0,015 | 0,030 | |||
| G035 | (290) | (110) | (50) | – | – | 75 | 0,025 | 0,050 | |||||
| R300 | 0,2 | 5 | 300 | 370 | (min. 150) | 16 | 25 | – | – | – | – | ||
| H085 | – | – | – | – | – | 85 | 115 | – | – | ||||
| R350 | 0,2 | 5 | 350 | 420 | (min. 250) | 4 | 12 | – | – | – | – | ||
| H105 | – | – | – | – | – | 105 | 135 | – | – | ||||
| R410 | 0,2 | 5 | 410 | – | (min. 360) | – | – | – | – | – | – | ||
| H125 | – | – | – | – | – | 125 | – | – | – | ||||
| CuZn20 | CW503L | R270 | 0,2 | 5 | 270 | 320 | (max. 150) | 38 | 48 | – | – | – | – |
| H055 | – | – | – | – | – | 55 | 85 | – | – | ||||
| G010 | 0,2 | 1 | (340) | (190) | (50) | – | – | 105 | – | 0,015 | |||
| G020 | 0,2 | 2 | (300) | (125) | (50) | – | – | 85 | 0,015 | 0,030 | |||
| G035 | (290) | (110 | (50) | – | – | 75 | 0,025 | 0,050 | |||||
| R320 | 0,2 | 5 | 320 | 400 | (min. 200) | 20 | 28 | – | – | – | – | ||
| H085 | – | – | – | – | – | 85 | 120 | – | – | ||||
| R400 | 0,2 | 5 | 400 | 480 | (min. 320) | 5 | 12 | – | – | – | – | ||
| H120 | – | – | – | – | – | 120 | 155 | – | – | ||||
| R480 | 0,2 | 2 | 480 | – | (min. 440) | – | – | – | – | – | – | ||
| H155 | – | – | – | – | – | 155 | – | ||||||
| CuZn30 | CW505L | R270 | 0,2 | 5 | 270 | 350 | (max. 160) | 40 | 50 | – | – | – | – |
| H055 | – | – | – | – | – | 55 | 90 | – | – | ||||
| G010 | 0,2 | 1 | (410) | (210) | (40) | – | – | 120 | – | 0,015 | |||
| G020 | 0,2 | 2 | (360) | (150) | (40) | – | – | 95 | 0,015 | 0,030 | |||
| G030 | (340) | (130) | (40) | – | – | 90 | 0,020 | 0,040 | |||||
| G050 | (330) | (110) | (40) | – | – | 80 | 0,035 | 0,070 | |||||
| G075 | (310) | (90) | (50) | – | – | 70 | 0,050 | 0,100 | |||||
| R350 | 0,2 | 5 | 350 | 430 | (min. 170) | 21 | 33 | – | – | – | – | ||
| H095 | – | – | – | – | – | 95 | 125 | – | – | ||||
| R410 | 0,2 | 5 | 410 | 490 | (min. 260) | 9 | 15 | – | – | – | – | ||
| H120 | – | – | – | – | – | 120 | 155 | – | – | ||||
| R480 | 0,2 | 2 | 480 | – | (min. 430) | – | – | – | – | – | – | ||
| H150 | – | – | – | – | – | 150 | – | – | – | ||||
| CuZn33 | CW506L | R280 | 0,2 | 5 | 280 | 380 | (max. 170) | 40 | 50 | – | – | – | – |
| H055 | – | – | – | – | – | 55 | 90 | – | – | ||||
| G010 | 0,2 | 1 | (410) | (210) | (40) | – | – | 120 | – | 0,015 | |||
| G020 | 0,2 | 2 | (360) | (150) | (40) | – | – | 95 | 0,015 | 0,030 | |||
| G030 | (340) | (130) | (40) | – | – | 90 | 0,020 | 0,040 | |||||
| G050 | (330) | (110) | (40) | – | – | 80 | 0,035 | 0,070 | |||||
| R350 | 0,2 | 5 | 350 | 430 | (min. 170) | 23 | 31 | – | – | – | – | ||
| H095 | – | – | – | – | – | 95 | 125 | – | – | ||||
| R420 | 0,2 | 5 | 420 | 500 | (min. 300) | 6 | 13 | – | – | – | – | ||
| H125 | – | – | – | – | – | 120 | 155 | – | – | ||||
| R500 | 0,2 | 2 | 500 | – | (min. 450) | – | – | – | – | – | – | ||
| H155 | – | – | – | – | – | 155 | – | – | – | ||||
| CuZn36 CuZn37 |
CW507L CW508L |
R300 | 0,2 | 5 | 300 | 370 | (max. 180) | 38 | 46 | – | – | – | – |
| H055 | – | – | – | – | – | 55 | 90 | – | – | ||||
| G010 | 0,2 | 1 | (410) | (210) | (40) | – | – | 120 | – | 0,015 | |||
| G020 | 0,2 | 2,0 | (360) | (150) | (40) | – | – | 95 | 0,015 | 0,030 | |||
| G030 | (340) | (130) | (40) | – | – | 90 | 0,020 | 0,040 | |||||
| G050 | (330) | (110) | (40) | – | – | 80 | 0,035 | 0,070 | |||||
| R350 | 0,2 | 5 | 350 | 440 | (min. 170) | 19 | 28 | – | – | – | – | ||
| H095 | – | – | – | – | – | 95 | 125 | – | – | ||||
| R410 | 0,2 | 5 | 410 | 490 | (min. 300) | 8 | 12 | – | – | – | – | ||
| H125 | – | – | – | – | – | 120 | 155 | – | – | ||||
| R480 | 0,2 | 2 | 480 | 560 | (min. 430) | 3 | – | – | – | – | – | ||
| 150 | – | – | – | – | – | 150 | 180 | – | – | ||||
| R550 | 0,2 | 2 | 550 | – | (min. 500) | – | – | – | – | – | – | ||
| H170 | – | – | – | – | – | 170 | – | – | – | ||||
| CuZn40 | CW509L | R340 | 0,3 | 10 | 340 | 420 | (max. 240) | 33 | 43 | – | – | – | – |
| H085 | – | – | – | – | – | 85 | 115 | – | – | ||||
| R400 | 0,3 | 10 | 400 | 480 | (min. 200) | 15 | 23 | – | – | – | – | ||
| H110 | – | – | – | – | – | 110 | 140 | – | – | ||||
| R470 | 0,3 | 5 | 470 | – | (min. 390) | 6 | 12 | – | – | – | – | ||
| H140 | – | – | – | – | – | 140 | – | – | – | ||||
| CuZn35Pb1 CuZn37Pb0,5 CuZn37Pb2 |
CW600N CW604N CW606N |
R290 | 0,3 | 5 | 290 | 370 | (max. 200) | 40 | 50 | – | – | – | – |
| H060 | – | – | – | – | – | 60 | 110 | – | – | ||||
| R370 | 0,3 | 5 | 370 | 440 | (min. 200) | 19 | 28 | – | – | – | – | ||
| H110 | – | – | – | – | – | 110 | 140 | – | – | ||||
| R440 | 0,3 | 2 | 440 | 540 | (min. 370) | 5 | 12 | – | – | – | – | ||
| H140 | – | – | – | – | – | 140 | 170 | – | – | ||||
| R540 | 0,3 | 2 | 540 | – | (min.490) | – | – | – | – | – | – | ||
| H170 | – | – | – | – | – | 170 | – | – | – | ||||
| CuZn39Pb2 | CW612N | R360 | 0,3 | 5 | 360 | 440 | (max. 270) | 30 | 40 | – | – | – | – |
| H090 | – | – | – | – | – | 90 | 120 | – | – | ||||
| R420 | 0,3 | 5 | 420 | 500 | (min. 270) | 12 | 20 | – | – | – | – | ||
| H120 | – | – | – | – | – | 120 | 150 | – | – | ||||
| R490 | 0,3 | 5 | 490 | 570 | (min. 420) | – | 9 | – | – | – | – | ||
| H150 | – | – | – | – | – | 150 | 180 | – | – | ||||
| R560 | 0,3 | 2 | 560 | – | (min. 510) | – | – | – | – | – | – | ||
| H175 | – | – | – | – | – | 175 | – | – | – | ||||
| CuZn38Pb2 CuZn39Pb0,5 |
CW608N CW610N |
R340 | 0,3 | 10 | 340 | 420 | (max. 240) | 33 | 43 | – | – | – | – |
| H075 | – | – | – | – | – | 75 | 110 | – | – | ||||
| R400 | 0,3 | 10 | 400 | 480 | (min. 200) | 14 | 23 | – | – | – | – | ||
| H110 | – | – | – | – | – | 110 | 140 | – | – | ||||
| R470 | 0,3 | 5 | 470 | 550 | (min. 390) | 5 | 12 | – | – | – | – | ||
| H140 | – | – | – | – | – | 140 | 170 | – | – | ||||
| R540 | 0,3 | 2 | 540 | – | (min. 490) | – | – | – | – | – | – | ||
| H165 | – | – | – | – | – | 165 | – | – | – | ||||
| CuZn20Al2As | CW702R | R330 | 3 | 15 | 330 | – | (min. 90) | – | 30 | – | – | – | – |
| H070 | – | – | – | – | – | 70 | 105 | – | – | ||||
| R390 | 3 | 15 | 390 | – | (min. 240) | – | 25 | – | – | – | – | ||
| H100 | – | – | – | – | – | 100 | – | – | – | ||||
Tolerances
TOLERANCES ON THICKNESS OF HOT-ROLLED PRODUCTS
| Nominal thickness | Thickness tolerances for nominal widths | |||||||
|---|---|---|---|---|---|---|---|---|
| Up to and including 700 | Greater than 700, up to and inc. 1000 | Greater than 1000, up to and inc. 1500 | Greater than 1500 | |||||
| greather than | up to and including | 1) | 2) | 1) | 2) | 1) | 2) | |
| – | 2,5 | By agreement | By agreement | By agreement | By agreement | |||
| 2,5 | 5,0 | ± 0,25 | ± 0,30 | ± 0,30 | ± 0,35 | ± 0,35 | ± 0,45 | |
| 5,0 | 7,5 | ± 0,35 | ± 0,45 | ± 0,40 | ± 0,50 | ± 0,45 | ± 0,55 | |
| 7,5 | 10 | ± 0,45 | ± 0,60 | ± 0,50 | ± 0,65 | ± 0,55 | ± 0,75 | |
| 10 | 15 | ± 0,75 | ± 0,95 | ± 0,80 | ± 1,00 | ± 0,90 | ± 1,10 | |
| 15 | 25 | ± 0,95 | ± 1,20 | ± 1,05 | ± 1,30 | ± 1,30 | ± 1,60 | |
| 25 | 50 | ± 1,30 | ± 1,60 | ± 1,40 | ± 1,75 | ± 1,50 | ± 1,90 | |
| 50 | – | ± 1,50 | ± 1,90 | ± 1,65 | ± 2,05 | ± 1,80 | ± 2,20 | |
| 1) For all materials, except CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R). | ||||||||
| 2) For all alloys CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R). | ||||||||
TOLERANCES ON THICKNESS OF COLD ROLLED PRODUCTS
| Nominal thickness | Thickness tolerances for nominal widthsa | ||||
|---|---|---|---|---|---|
| greather than | up to and including | Up to and including 350 | greather than 350 Up to and including 700 | Greater than 700, up to and inc. 1000 | Greater than 1000, up to and inc. 1250 |
| 0.1b | 0,2 | ± 0,018 | – | – | – |
| 0,2 | 0,3 | ± 0,022 | ± 0,03 | ± 0,04 | – |
| 0,3 | 0,4 | ± 0,025 | ± 0,04 | ± 0,05 | ± 0,07 |
| 0,4 | 0,5 | ± 0,03 | ± 0,05 | ± 0,06 | ± 0,08 |
| 0,5 | 0,8 | ± 0,04 | ± 0,06 | ± 0,07 | ± 0,09 |
| 0,8 | 1,2 | ± 0,05 | ± 0,07 | ± 0,09 | ± 0,10 |
| 1,2 | 1,8 | ± 0,06 | ± 0,08 | ± 0,10 | ± 0,11 |
| 1,8 | 2,5 | ± 0,07 | ± 0,09 | ± 0,11 | ± 0,13 |
| 2,5 | 3,2 | ± 0,08 | ± 0,10 | ± 0,13 | ± 0,17 |
| 3,2 | 4,0 | ± 0,10 | ± 0,12 | ± 0,15 | ± 0,20 |
| 4,0 | 5,0 | ± 0,12 | ± 0,14 | ± 0,17 | ± 0,23 |
| 5,0 | 6,0 | ± 0,14 | ± 0,16 | ± 0,20 | ± 0,26 |
| 6,0 | 7,0 | ± 0,16 | ± 0,19 | ± 0,23 | ± 0,29 |
| 7,0 | 8,0 | ± 0,18 | ± 0,22 | ± 0,26 | ± 0,32 |
| 8,0 | 9,0 | ± 0,20 | ± 0,25 | ± 0,29 | ± 0,35 |
| 9,0 | 10,0 | ± 0,22 | ± 0,28 | ± 0,32 | ± 0,38 |
| a For all alloys CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R), tolerances on thickness must be multiplied by 1.25 and the redult rounded up to 0.01mm | |||||
| b includes 0.1. | |||||
| NOTA – For thicknesses greater than 10 mm, tolerances are those indicated in Norm EN 1653. | |||||
Reviews
There are no reviews yet.