Gleason Hardac - Cutter Blades for Finishing Cutters

Gleason Hardac Type – Cutter Blades for finishing cuttersHARDAC, HARDAC II, HARDAC III

These blades are used for GENERATING gears and pinions.

Single-sided / Two sided outside or inside (Point diameter) without profile modification (without TOPREM) or with profile modification (with TOPREM),

Adjustable in both an angular and radial plane, these inserted blade cutters are used for completing or finishing. The rigid design enables completing of spiral and hypoid pinions and gears directly from the solid blank. Widely used universal cutter system with HSS blades

Used for 5″, 6″, 7.5″, 9″, 12″, 16″, 18″ diameter HARDAC and HARDAC II cutters, manufactured in the full range of blade profile dimensions as right hand (RH) or left hand (LH).

Technical Specification: Required for Ordering Blades to cut pinion & Crown wheel

• Cutter Diameter
• Point Width
• Whole Depth of the Gear or Pinion to be cut
• Pressure Angle of O.B & I.B Blades
• No. of blades per set
• Blade Edge Radius

Material:

• HSS M2, M35

Coating:

• TIN, ALTIN, ALCRONA PRO (as per request)